Chainsaw repair around Omaha, Arkansas

A saw that won’t start, bogs down when you cut, or dies when it idles. I’m Jezreel Garrett, and I fix chainsaws, at your place if that’s easier.

Call (870) 416‑2417 Send a text

What I do on chainsaws

  • Tune-ups: spark plug, air filter and fuel filter.
  • Carburetor cleaning, repair and adjustment.

If your chain needs sharpening too, ask when you call.

Why a saw won’t start or won’t keep running

  • Old fuel. Mixed two-stroke fuel goes stale faster than plain gas. Fuel that’s sat a season can gum up the carburetor.
  • The wrong mix. Two-stroke saws need oil mixed into the gas at the ratio in the owner’s manual. Straight gas can ruin the engine in minutes.
  • A clogged air filter or fuel filter. The saw bogs down when you put it in the wood, or won’t rev up.
  • A carburetor out of adjustment. It idles rough, stalls, or the chain keeps turning at idle.

A dull chain feels like an engine problem. If you’re pushing the saw through the cut, or it makes fine dust instead of chips, the chain is the first thing to check.

Before you call

Tell me the brand and model (it’s on the side of the saw), what it’s doing, and how old the fuel in it is.

Keeping it running

  • Mix fresh fuel in small batches, and use a fuel stabilizer if it’ll sit.
  • Empty the tank and run the saw until it stops before you store it for a long time.
  • Clean the air filter after a long day of cutting.

Get in touch

Tell me what it is and what it’s doing, and we’ll pick a time.

(870) 416‑2417

Call Send a text